IR Infrared Night Vision Light 850nm + Rechargeable 12v & USB Battery, Ghost Hunting

IR Infrared Night Vision Light + Rechargeable 12v & USB Battery 850nm

This kit brings together the two components you need for a go anywhere IR infrared night vision lighting set up that can run from both mains power and battery pack. It consists of one 48 LED Light IR Infrared Night Vision metal style light & One 12V Rechargeable Battery Pack with USB 5v &12v outlets

This updated model includes power reserve indicator LED display so you know how much power you have at any given time

IR Infrared Night Vision Metal Light 850nm

This is the industry standard infrared (IR)illuminator, it comes with a solid metal housing and tough glass front making it weather resistant and hard wearing. The lantern style light has an array of 48 medium focus beamed led's in the infrared light spectrum of around 850nm, this wavelength of light is visible to the naked eye only when looking directly at the led's and shows as a deep dark red. The light produced is however invisible to the naked eye and can only bee seen using night vision IR or full spectrum cameras or viewing devices. Infrared is a popular lighting format for paranormal investigation as it is outside the human vision range allowing the location to remain totally dark while still being able to see clearly with the night vision cameras. The lantern also incorporates a low light sensor that will turn the infrared led's on automatically when the ambient light levels drop to a dark enough level saving power or battery drain. Depending on the light sensitivity of the camera used this light can illuminate up to around a viewing range 15 m to 20 m. A great IR lighting option that can be used singularly or in multiples and can easily be mounted to a camcorder or camera using a flash bracket or fixed on a tripod for stand alone IR lighting as well as floor or table top use.
Lantern Size 7.5 cm x 6 cm x 6 cm, cable is around 54 cm long & ends in a standard female CCTV style socket, the chosen power supply will require a standard CCTV male plug (2.1MM(inner); 5.5MM (outer) for connection. See our listings on options for power supplies cables and fittings.

This light will run on DC 9 volt - 12 volt power supply (not included) glass fronted indoor use only, range up to 20 m
Please Note! This light is for use with camera's that have infrared night vision, the light is almost invisible to the human eye. This power kit gives you a go anywhere power supply for your IR infrared night vision lighting set up allowing you to run from both mains power or the battery pack. This model now also includes a 5v USB socket that allows you to power any USB device like a go pro style camera at the same time as the IR light giving a compact go anywhere power solution.

12V & USB Socket Rechargeable Battery Pack
This is a fully enclosed power supply in a hard plastic case with On/Off switch for use with our 12v IR Infrared lights. This model comes with a standard female CCTV style socket and includes lighting connector cable and charger, this model also has a USB socket for powering a USB driven camera at the same time or seperatly. This is a fully integrated power solution for our 12v IR lights and USB cameras that gives you full portability and freedom to light in places with no power supplies. If you do have a mains power supply you can even power a light directly from the battery charger (Max 1x 48 led light or 500ma draw). The power packs can be fixed to camera rigs or used for stand alone light rigs for a more professional infrared lighting result. We find that a combination of IR light both on board the camera and also stand alone give a superior lighting to your location as on-board camera only lighting can give very flat looking results.
This 12v rechargeable battery comes hard shell enclosed (g) & a 5V USB socket and also includes Light connection cable and EU style plug charger/ Mains power supply. WE include a UK adapter with the transformer for use in the UK

Important Notice on Charging
Please note that when charging these batteries the power switch on the battery itself must be in the on position, the indicator light on the plug charger will be red and turn green when the battery is fully charged. When use with a 48 LED style light this battery should give around 5 hours or more illumination time, exact times will vary due to climatic conditions and power draw.

NEW! We now also include a connecting adapter for use with a 9v PP3 battery, please note that the light will only work at around half the brightness using this method, it is however a useful added option.

"We don't pretend to have the answers to the mysteries of the spirit world, but together we just might catch a glimpse of the other side" (Walking With Ghosts TV)

Neither Walking with ghosts or funky lighting are associated with, or promote any form of religion or organised faith structure. We are simply open minded people who have a passion in exploring unusual and unexplained phenomenon, as well as social history, mythology and folk-law from every corner of the globe